AOI Test

Continuing miniaturization of components and increasing complexity of boards is driving the need for PCB AOI Testing:Checks for missing comp...

2017-06-27

Chemical&Physical Laboratory

Chemical laboratory is a very important part of PCB dry and wet process. It is also an important base of technology research and development...

2017-06-27

Auto E-test Machine

Electrical performance test is mainly to test continuity and insulation of substrate circuit. Continuity test refers to whether continuity o...

2017-06-27

Auto E-test MachineDrilling Machine

PCB drilling machine is a machine used in the drilling process of PCB processing.PCBs must be drilled with holes in the board to allow the p...

2017-06-27

Drilling Room

Drilling operations in addition to drilling blind holes, or very high level of precision requirements of the hole plate is very strict, with...

2017-06-27

Inner layer DES Line

Printed circuit board DES production line is the inner or outer acid etching of the development of + etching + stripping film line

2017-06-27

Inspection Machine

Focused on the panel glass, electronics industry, according to the size of the PCB market, the market appeared PCB testing equipment NV smal...

2017-06-27

Impedance Tester

Impedance tester for testing pcb parameters such as below that.At paresent,like such test is just simple for pwb industry,pcb factory want t...

2017-06-27

Film AOI

Process: Spraying - Exposure - Developing - Curing - EtchingThe role of exposure; the customer's graphic data in the form of positive or...

2017-08-17

Hole Checking Machine

The inspection of the PCB hole inspection machine is considered a critical test step in the PCB and semiconductor industry. X-ray systems mu...

2017-08-17

X Ray Target Drill

X-ray inspection machine is mainly for PCB board to check whether the targets of the layers are offset.X-ray inspection machine usesBefore a...

2017-08-17

Auto Visual Inspection

A magnifying glass with a circular tube to view line quality and alignment accuracy, if the outer layer still need to view the hole and coat...

2017-08-17

2D Measuring Instrument

Flying Probe Tester (Flying Probe Tester) is a type of instrument used to test PCB (printed circuit board) with high density, number of laye...

2017-08-17

PTH & Surface Copper Measurement

PTH (Plating Through Hole) Metallized hole, so the layer to which it is connected is conductive; there is an electrical connection. In contr...

2017-08-17

Auto Drill Bit Sharpener

The Auto Drill Bit Sharpener is designed to help you with brick drilling without any mistakes in the brick, and the hole size of the brick w...

2017-08-17