Industry News

The tombstoning phenomenon refers to the phenomenon that one end of the electronic component does not touch the pad and stands obliquely upwards or the contact pad is upright dur...

PCBA conformal coating is a kind of protective coating, which will form a transparent protective film after curing to protect PCBA from environmental erosion. PCBA...

ENEPIG and plating gold are relatively special surface treatment technologies in PCB. They all have the characteristics of good welding performance, good reliability an...

After the PCB is printed, various electronic components need to be welded to fixed positions as required to form a PCBA with certain functions, and the welding positions of ...

Conformal coating is a specially formulated coating used to protect circuit boards and related equipment from environmental erosion. In addition to anti-mildew, anti-salt spray a...

In PCBA processing, it is more common to apply solder paste for soldering by wave soldering or reflow soldering, but sometimes a dispensing technology is also required. So what i...

During PCB assembly, bubbles sometimes appear during PCB soldering, which usually occurs during reflow soldering and wave soldering. Excessive bubbles wi...

The PCBA processing process is a very precise process, and it is more complicated and cumbersome, so there will be relatively high defects in the PCBA processing process. In orde...

In the PCBA processing process, welding is a very important process. If there is a slight negligence in the operation and the relevant process regulations are not implemente...

With the development of science and technology, the volume of PCBA is getting smaller and more precise, and some defects in processing cannot be distinguished with the naked eye,...